Creating Your Own Bicycle-Powered Saw

bicycle saw

If there’s a machine-powered saw, there’s also a bicycle-powered saw.

Check out the best circular saws out there at!

You might ask: there is? Indeed, there is!

What’s more, you can even create your own bicycle-powered saw – as seen on this file and on this detailed blog post from Mother Earth News.

Thus, here are some points to remember:

  • Creating your own bicycle-powered saw requires a lot of patience. This is because of the amount of materials being used to build a working model. Aside from that, obviously, you’ll have to start from scratch and must be ready and truly prepared for the job.
  • The characteristics of necessary parts greatly matter. This is because some materials might be too much or too low on something and in turn, would not be able to serve their full purposes. Thus, accuracy is the key to creating a bicycle-powered saw.
  • Always make sure that everything fits. As mentioned before, accuracy is the key to creating a bicycle-powered saw – now, perfectly and working great. Everything should fit where it’s meant to be places. More than that, the materials should not be easily detached from its place.
  • The kind of pedal you will use for the bicycle-powered saw is a success factor. The pedal should not be too hard or too soft. It should be right, in a sense where one can pedal the bike faster or slower without exerting too much effort for it to happen.

Let’s face it, though: creating your own bicycle-powered saw might take a long time to finish or become too expensive for you to continue doing. However, every sweat, time, and effort you’ll put into it will be priceless. You see, only a few were able to do this – something that most people would find truly impossible. But you know what? Who cares? Those people can do it. Thus, you can also do it!

Leave a Reply

Your email address will not be published. Required fields are marked *